This section will help owners of apartments in apartment buildings understand the list of services and works included in the minimum list in accordance with current legislation, necessary to ensure proper maintenance of common property.
The frequency of provision of services and performance of work provided for in the list of services and work is determined taking into account the requirements established by the legislation of the Russian Federation.
By decision of the owners of premises in an apartment building, a more frequent frequency of providing services and performing work may be established than is provided for by the legislation of the Russian Federation.
WORK PERFORMED ON ALL TYPES OF FOUNDATIONS
1.Checking the compliance of the parameters of the vertical layout of the area around the building with the design parameters, and eliminating identified violations;
2.Checking the technical condition of visible parts of structures to identify:
— signs of uneven settlement of foundations of all types;
— corrosion of reinforcement;
— delamination, cracks, bulging, deviations from the vertical in houses with concrete, reinforced concrete and stone foundations;
- rot damage and partial destruction of the wooden foundation in houses with columnar or pile wooden foundations;
When violations are identified, the development of control pits in places where defects were detected, a detailed examination and the drawing up of an action plan to eliminate the causes of the violation and restore the operational properties of structures.
CHECKING THE CONDITION OF WATERPROOFING FOUNDATIONS AND FOUNDATION DRAINAGE SYSTEMS IN AN APARTMENT BUILDING
If violations are detected, their functionality is restored.
Determination and documentation of the temperature of permafrost soils for foundations in permafrost conditions.
WORK PERFORMED IN BUILDINGS WITH BASEMENTS
1.Checking the temperature and humidity conditions in basements and, if violations are identified, eliminating the causes of its violation.
2. Checking the condition of basement premises, basement entrances and pits, taking measures to prevent flooding, littering, pollution and cluttering of such premises, as well as measures to ensure their ventilation in accordance with design requirements.
3. Monitoring the condition of basement doors and technical undergrounds, and locking devices on them. Elimination of identified faults.
WORK PERFORMED FOR PROPER MAINTENANCE OF THE WALLS OF APARTMENT BUILDINGS
1. Identification of deviations from the design operating conditions, unauthorized changes in the design solution, signs of loss of load-bearing capacity, the presence of deformations, violation of heat-shielding properties, waterproofing between the basement of the building and the walls, malfunction of drainage devices.
2. Detection of traces of corrosion, deformation and cracks in the locations of reinforcement and embedded parts, the presence of cracks in the junction of internal transverse walls with external walls made of load-bearing and self-supporting panels, from large-sized blocks.
3. Detection of damage in masonry, the presence and nature of cracks, weathering, deviations from the vertical and bulging of individual sections of walls, disruption of connections between individual structures in houses with walls made of small blocks, artificial and natural stones.
4. Detection of fastening defects, notches, distortion, chipping, deviations from the vertical in the elements of wooden structures of log, frame, block, prefabricated panel and other houses with wooden walls, as well as the presence in such structures of areas affected by rot, wood-destroying fungi and bugs - by grinders, with high humidity, with destruction of wall cladding or plaster.
In case of detection of damages and violations
— drawing up an action plan for instrumental inspection of walls, restoration of design conditions for their operation and its implementation.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF FLOORS OF AN APARTMENT BUILDING
Detection of violations of operating conditions, unauthorized changes in design solutions, identification of deflections, cracks and vibrations.
1.Identification of the presence, nature and size of cracks in the body of the floor and at the junctions with the walls, peeling of the protective layer of concrete and exposure of reinforcement, corrosion of reinforcement in houses with floors and coverings made of monolithic reinforced concrete and precast reinforced concrete slabs.
2. Detection of the presence, nature and size of cracks, displacement of slabs relative to each other in height, peeling of the leveling layer in sealing joints, traces of leaks or freezing on slabs and on walls in places of support, peeling of the protective layer of concrete and exposure of reinforcement, corrosion of reinforcement in houses with floors and coverings made of prefabricated reinforced concrete flooring.
3.Identification of the presence, nature and size of cracks in the vaults, changes in the condition of the masonry, corrosion of beams in houses with ceilings made of brick vaults.
4. Identification of the instability of the ceiling, the presence, nature and size of cracks in the plaster layer, the integrity of load-bearing wooden elements and places of their support, traces of leaks on the ceiling, the density and moisture content of the backfill, damage by rot and grinding bugs to wooden elements in houses with wooden floors and coatings .
5.Checking the condition of insulation, waterproofing and sound insulation, adhesion of finishing layers to the floor (covering) structures.
If damage and violations are identified, development of a restoration work plan (if necessary) and carrying out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF COLUMNS AND PILLARS OF AN APARTMENT BUILDING
1. Identification of violations of operating conditions, unauthorized changes to the design solution, loss of stability, the presence, nature and size of cracks, bulging, deviations from the vertical.
2. Monitoring the condition and identifying corrosion of reinforcement and reinforcing mesh, peeling of the protective layer of concrete, exposure of reinforcement and disruption of its adhesion to concrete, deep chips of concrete in houses with prefabricated and monolithic reinforced concrete columns.
3. Detection of destruction or falling out of bricks, ruptures or pulling out of steel ties and anchors, damage to masonry under the supports of beams and lintels, crushing of stone or displacement of masonry rows along horizontal seams in houses with brick pillars.
4. Detection of rot, wood-destroying fungi and borers, delamination of wood, ruptures of wood fibers in houses with wooden posts.
5. Monitoring the condition of metal embedded parts in houses with prefabricated and monolithic reinforced concrete columns.
6. If damage and violations are identified, develop a plan for restoration work (if necessary), carry out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF FLOW BEAMS
1. Monitoring the condition and identifying violations of operating conditions, unauthorized changes in design, stability, deflections, vibrations and cracks.
2. Detection of surface spalling and peeling of the protective layer of concrete in the tensile zone, exposure and corrosion of reinforcement, large potholes and chips of concrete in the compressed zone in houses with monolithic and prefabricated reinforced concrete beams for floors and coatings.
3. Detection of corrosion with a decrease in the cross-sectional area of load-bearing elements, loss of local stability of structures (buckling of walls and beam chords), cracks in the base material of elements in houses with steel floor beams and coverings.
4. Detection of moisture and rotting of wooden beams, violations of the insulation of beams embedded in walls, ruptures or tears in wood near knots and cracks in joints on the shear plane.
If damage or irregularities are detected
— development of a restoration work plan (if necessary), carrying out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF ROOFS OF APARTMENT BUILDINGS
1.Checking the roof for leaks.
2.Checking lightning protection devices, grounding of masts and other equipment located on the roof.
3. Detection of deformation and damage to load-bearing roof structures, antiseptic and fire protection of wooden structures, fastenings of elements of load-bearing roof structures, drainage devices and equipment, dormers, roof exits, walking boards and transition bridges in attics, settlement and expansion joints, water inlet funnels internal drainage.
4.Checking the condition of protective concrete slabs and fences, the filtering capacity of the drainage layer, the support points of reinforced concrete boxes and other elements on operating roofs.
5.Checking the temperature and humidity conditions and air exchange in the attic.
6. Monitoring the condition of equipment or devices that prevent the formation of ice and icicles.
7. Inspection of the ceilings of the upper floors of houses with combined (attic) roofs to ensure regulatory requirements for their operation during a period of prolonged and stable negative outdoor temperatures, affecting possible freezing of their coatings.
8.Checking and, if necessary, cleaning the roof and drainage devices from debris, dirt and ice that impede the flow of rain and melt water.
9.Checking and, if necessary, cleaning the roof from accumulation of snow and ice.
10.Checking and, if necessary, restoring the protective paint layer of metal elements, painting metal roof fastenings with anti-corrosion protective paints and compounds.
11.Checking and, if necessary, restoring the bulk loading protective layer for elastomeric or thermoplastic membranes of the ballast method of connecting roofs.
12. Inspection and, if necessary, restoration of pedestrian paths in areas of pedestrian zones of roofs made of elastomeric and thermoplastic materials.
13.Checking and, if necessary, restoring the anti-corrosion coating of steel ties located on the roof and in the technical rooms of metal parts.
If violations leading to leaks are identified, they must be eliminated immediately.
In other cases - development of a restoration work plan (if necessary), carrying out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF STAIRS OF APARTMENT BUILDINGS
1. Detection of deformation and damage in load-bearing structures, reliability of fastening of fences, potholes and chips in steps.
2. Identification of the presence and parameters of cracks in the interfaces of mid-flight slabs with load-bearing structures, exposure and corrosion of reinforcement, disruption of connections in individual treads in houses with reinforced concrete stairs.
3. Detection of deflections of stringers, disruption of the connection between stringers and platforms, corrosion of metal structures in houses with stairs on steel stringers.
4. Identification of deflections of load-bearing structures, violations of the fastening of bowstrings to beams supporting landings, notches in staircase structures, as well as the presence of rot and grinding bugs in houses with wooden stairs.
5. If damage and violations are identified, develop a plan for restoration work (if necessary), and carry out restoration work.
6.Checking the condition and, if necessary, restoring the plaster layer or painting metal stringers with paint that provides a fire resistance limit of 1 hour in houses with stairs on steel stringers.
7.Checking the condition and, if necessary, treating wooden surfaces with antiseptic and anti-feather compounds in houses with wooden stairs.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF FACADES OF APARTMENT BUILDINGS
1. Identification of violations of the finishing of facades and their individual elements, weakening of the connection of finishing layers with walls, violations of the continuity and tightness of external gutters.
2. Monitoring the condition and performance of the illumination of information signs, entrances to entrances (house signs, etc.).
3. Identification of violations and performance qualities of load-bearing structures, waterproofing, elements of metal fencing on balconies, loggias and canopies.
4. Condition monitoring and restoration or replacement of individual elements of porches and umbrellas over building entrances, basements and balconies.
5. Monitoring the condition and restoring the density of entrance doors, self-closing devices (closers, springs), door travel limiters (stops).
If damage and violations are identified, development of a restoration work plan (if necessary) and carrying out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF PARTITIONS IN APARTMENT BUILDINGS
1. Detection of instability, bulging, and the presence of cracks in the body of the partitions and in places where they interface with each other and with main walls, ceilings, heating panels, door frames, in places where sanitary fixtures are installed and where various pipelines pass.
2.Checking sound insulation and fire protection.
If damage and violations are identified, development of a restoration work plan (if necessary) and carrying out restoration work.
WORK PERFORMED FOR PROPER MAINTENANCE OF INTERIOR FINISHING IN MULTIPLE APARTMENT BUILDINGS
1.Checking the condition of the interior finishing.
2. If there is a threat of collapse of the finishing layers or a violation of the protective properties of the finishing in relation to supporting structures and engineering equipment, eliminate the identified violations.
3.Checking the condition of the base, surface layer and functionality of the ventilation system (for wooden floors).
If damage and violations are identified, development of a restoration work plan (if necessary) and carrying out restoration work.
WORK PERFORMED FOR THE PURPOSES OF PROPER MAINTENANCE OF COMMON PROPERTY IN APARTMENT BUILDINGS
1. Checking the integrity of window and door fillings, the density of the rebates, the mechanical strength and operability of the fittings of the elements of window and door fillings in the premises belonging to the common property in an apartment building.
If violations are detected during the heating season, immediate repairs are required.
In other cases - development of a restoration work plan (if necessary), carrying out restoration work.
2.Checking the technical condition and operability of the waste chute elements.
If blockages are detected, remove them immediately.
Cleaning, rinsing and disinfection of loading valves of garbage chutes, garbage collection chamber and its equipment.
If damage and violations are identified, development of a restoration work plan (if necessary) and carrying out restoration work.
WORK PERFORMED FOR THE PROPER MAINTENANCE OF VENTILATION AND SMOKE EXHAUST SYSTEMS IN APARTMENT BUILDINGS
1. Maintenance and seasonal management of equipment for ventilation and smoke removal systems, determining the performance of equipment and system elements.
2. Monitoring the condition, identifying and eliminating the causes of unacceptable vibrations and noise during operation of the ventilation unit.
3.Checking the insulation of warm attics and the tightness of closing the entrances to them.
4. Elimination of leaks in ventilation ducts and shafts, elimination of blockages in ducts, elimination of malfunctions of dampers and throttle valves in exhaust shafts, umbrellas over shafts and deflectors, replacement of defective exhaust grilles and their fastenings.
5. Checking the serviceability, maintenance and repair of refrigeration system equipment.
6. Monitoring and ensuring the good condition of automatic smoke removal systems.
7. Seasonal opening and closing of the heater from the air supply side.
8. Monitoring the condition and restoration of anti-corrosion painting of metal exhaust ducts, pipes, trays and deflectors.
If damage or irregularities are detected
— development of a restoration work plan (if necessary), carrying out restoration work.
WORK PERFORMED FOR PROPER MAINTENANCE OF WATER SUPPLY, HEATING AND DRAINAGE SYSTEMS OF APARTMENT BUILDINGS
1.Checking serviceability, operability, adjustment and maintenance of pumps, shut-off valves, instrumentation, automatic regulators and devices, collective (common house) metering devices, expansion tanks and elements hidden from constant observation (distribution pipelines and equipment in attics, in basements and canals).
2. Constant monitoring of coolant and water parameters (pressure, temperature, flow) and immediate action to restore the required parameters of heating and water supply and the tightness of the systems.
3. Monitoring the condition and replacing faulty instrumentation (pressure gauges, thermometers, etc.).
4. Restoration of operability (repair, replacement) of equipment and heating appliances, water fittings (mixers, taps, etc.) related to common property in an apartment building.
5. Monitoring the condition and immediately restoring the tightness of pipeline sections and connecting elements in the event of their depressurization.
6. Monitoring the condition and restoring the serviceability of elements of internal sewerage, sewer hoods, internal drainage, drainage systems and yard sewerage.
7. Switching for the purpose of reliable operation of the operating modes of the internal drain, hydraulic shutter of the internal drain.
8.Rinsing of water supply sections after performing repair and construction work on the water supply.
9.Cleaning and rinsing water tanks.
10.Checking and ensuring the operability of local local treatment facilities (septic tanks) and yard toilets.
11.Rinsing water supply systems to remove scale-corrosion deposits.
12. Tests for strength and density (hydraulic tests) of input units and heating systems, flushing and adjustment of heating systems.
13. Carrying out trial commissioning work (trial fireboxes).
14. Removing air from the heating system.
15.Rinsing of centralized heating systems to remove scale-corrosion deposits.
WORK PERFORMED FOR PROPER MAINTENANCE OF IN-HOUSE GAS EQUIPMENT SYSTEMS IN AN APARTMENT BUILDING
1.Organization of checking the condition of the in-house gas equipment system and its individual elements.
2.Organization of maintenance and repair of indoor gas control systems.
When identifying violations and malfunctions of indoor gas equipment, smoke removal and ventilation systems that can lead to gas accumulation in the premises, organize work to eliminate them.
WORKS AND SERVICES FOR THE MAINTENANCE OF OTHER COMMON PROPERTY IN AN APARTMENT BUILDING
1.Dry and wet cleaning of vestibules, halls, corridors, galleries, elevator landings and elevator halls and cabins, landings and flights, ramps.
2. Wet wiping of window sills, window grilles, stair railings, cabinets for electric meters of low-current devices, mailboxes, door frames, door leaves, closers, door handles.
3.Washing windows.
4. Cleaning of dirt protection systems (metal gratings, cellular coverings, pits, textile mats).
5. Carrying out deratization and disinfestation of premises that are part of the common property in an apartment building, disinfection of septic tanks, yard toilets located on the land plot on which this house is located.
6. Cleaning manhole covers of wells and fire hydrants from snow and ice with a layer thickness of more than 5 cm.
7. Shifting freshly fallen snow and clearing the local area of snow and ice in the presence of rutting over 5 cm.
8. Clearing the local area of alluvial snow (or sweeping such an area free of snow cover).
9. Cleaning the local area from frost and ice.
10. Cleaning garbage bins installed near entrances and washing them.
11. Cleaning the porch and area in front of the entrance.
12. Sweeping and cleaning the local area.
13. Clearing garbage and washing bins installed near entrances.
14.Cleaning and mowing lawns.
15.Cleaning storm drains.
16. Cleaning the porch and area in front of the entrance, cleaning the metal grate and pit.
WORK ON ORGANIZATION AND MAINTENANCE OF WASTE ACCUMULATION PLACES
1. The specified work does not include cleaning of solid municipal waste loading areas.
2. The concept of “cleaning of loading areas for municipal solid waste” is used in the meaning provided for by the Rules for the management of municipal solid waste, approved by Decree of the Government of the Russian Federation of November 12, 2021 N 1156 “On the management of municipal solid waste and amendments to the Decree of the Government of the Russian Federation Federation dated August 25, 2008 N 641.”
3.Organization of the accumulation of waste of I-IV hazard classes (used mercury-containing lamps, etc.) and their transfer to organizations that have licenses to carry out activities for the collection, transportation, processing, disposal, neutralization, and disposal of such waste.
4. Ensuring fire safety requirements - inspections and ensuring the operational condition of fire escapes, manholes, passages, exits, emergency lighting systems, fire extinguishing, alarm systems, fire water supply, fire protection equipment, smoke protection.
5. Ensuring the elimination of accidents in accordance with the established deadlines on intra-building engineering systems in an apartment building, fulfilling requests from the population.
6. Checking the condition and, if necessary, performing work to restore structures and (or) other equipment intended to ensure accessibility conditions for the disabled in the premises of an apartment building.
7. Services that may affect the provision of accessibility conditions for people with disabilities in the premises of an apartment building are carried out taking into account the provision of such access.
8. The list and procedure for providing services to ensure the safe operation of an apartment building can be found on this page
.
9. If you need advice on maintaining the property of residents in an apartment building or you believe that your rights have been violated, you can contact our specialists and get a free consultation.
| HELPFUL INFORMATION |
COST OF PROJECT APPROVAL
We will help you coordinate unauthorized redevelopment in St. Petersburg without bringing the owner of the premises to administrative liability, if the redevelopment complies with construction and sanitary standards and does not infringe on the rights of third parties...
REGULATORY REQUIREMENTS FOR REPLAYING
In a reconstructed residential building, when the location of sanitary facilities changes, measures must be taken for hydro, noise and vibration insulation, and to provide them with ventilation systems
, and also, if necessary, the floors on which sanitary facilities are installed must be reinforced
Space-planning solution for residential premises and their location in an apartment building, the minimum area of rooms and premises...
SANITARY AND EPIDEMIOLOGICAL REQUIREMENTS FOR LIVING CONDITIONS IN RESIDENTIAL BUILDINGS (SanPiN 2.1.2.2645-10)
Building maintenance includes a range of works to maintain elements in good condition
and intra-house systems, specified parameters and operating modes of its structures, equipment and technical devices
Current repairs of a building include a set of construction, organizational and technical measures in order to eliminate faults...
NORMS AND RULES FOR PROVIDING SERVICES FOR MAINTENANCE OF MKD PROPERTY
Building maintenance includes a range of works to maintain elements in good condition
and intra-house systems, specified parameters and operating modes of its structures, equipment and technical devices
Current repairs of a building include a set of construction, organizational and technical measures in order to eliminate faults...
RESPONSIBILITY FOR REPLAYING
Unauthorized redevelopment is the reconstruction and redevelopment of premises carried out in the absence of a foundation or in violation of the reconstruction and redevelopment project
The owner of a residential premises exercises the rights of ownership, use and disposal of what belongs to him by right of ownership...
LIST OF WORKS AND SERVICES FOR MAINTENANCE OF PROPERTY IN THE HOUSE
This section will help owners of apartments in apartment buildings understand the list of services and works included in the minimum list in accordance with current legislation, necessary to ensure proper maintenance of common property.
The frequency of provision of services and performance of work provided for in the list...
STATE REGISTRATION OF RIGHTS TO REAL ESTATE Federal Law No. 218
Federal Law No. 218 regulates relations arising in connection with state registration of rights to real estate and transactions with it
State registration of rights to real estate is a legal act of recognition and confirmation of the emergence of rights...
PROCEDURE FOR RECOGNIZING PREMISES AS RESIDENTIAL OR NON-RESIDENTIAL (PP No. 47)
The regulation establishes the requirements for residential premises, the procedure for recognizing residential premises as suitable for habitation and the grounds
, according to which the residential premises are recognized as unfit for habitation
The standards apply to residential premises in use, regardless of...
PROCEDURE FOR REGISTRATION OF A GARDEN HOUSE AS A RESIDENTIAL HOUSE
Registration of garden houses and their conversion into residential buildings is a service that is becoming increasingly popular.
A garden house is recognized as a residential building based on a decision of the local government body of the municipality...
ON THE CREATION OF INTERDEPARTMENTAL COMMISSIONS (PP No. 112)
The personal composition of the Commission is approved by a legal act of the administration of the district of St. Petersburg.
The Commission in its work is guided by the current legal acts of the Russian Federation and St. Petersburg, building codes and regulations, sanitary rules, as well as these Regulations...
DOCUMENTS FOR APPROVAL OF RENEWAL AND RECONSTRUCTION
In accordance with the Housing Code of the Russian Federation, the reconstruction of residential premises is the glazing of balconies, installation, replacement or transfer of utility networks, sanitary, electrical or other equipment, requiring changes to the technical passport of the residential premises...
RENEWAL OF BALCONY AND LOGGIA
The location of loggias and balconies on the facades of the building, the nature of their arrangement and appearance must correspond to the architectural design of the facade provided for by the project during construction...
RULES FOR MAINTENANCE OF FACADES
Changes and painting of the facade are carried out in accordance with the architectural assignment and color form of the Committee on Urban Planning and Architecture (KGA)
The basis for starting work on repairs, re-equipment, and painting of facades is the availability of an architectural assignment from the KGA, or KGIOP. Obtaining permits for the conversion, restoration, conservation and repair of buildings and structures that are objects of cultural heritage, as well as for the improvement and restoration of adjacent territories is carried out by KGIOP in the manner prescribed by law...
RENOVATION IN A BRICK HOUSE
To prepare a project for remodeling an apartment and carrying out repair work, it is necessary to determine the technical feasibility of changes and conduct an instrumental examination of the structures of the house, apartment, and components. Based on the technical conclusion, sections of the detailed project for redevelopment of the apartment are developed: architectural and construction part, metal structures, water supply and sewerage, electricity supply...
RENEWAL IN A PANEL HOUSE
Before starting redevelopment work, it is necessary to determine the technical feasibility of changes and conduct an instrumental examination of the structures of the house, apartment, and components. After the technical report has been prepared, sections of the detailed project for redevelopment of the apartment are developed: architectural and construction part, metal structures, water supply and sewerage, electrical supply...
SELECTION AND DESIGN OF REAL ESTATE
We have experience in rationing real estate, legal assessment of documents, cadastral and market assessment of objects, redevelopment and coordination with government authorities. We do not make unrealistic promises, but we can always help, correct the situation or solve your problem...
PROCEDURE FOR DISASSEMBLY OF WALLS
Requirements for organizing construction when carrying out work on redevelopment of premises...
ERRORS IN DISMANTLING WALLS
Errors when performing work on main walls...
REINFORCEMENT OF OPENINGS
Diamond cutting of openings and structures is a non-impact method, using discs with cutting edges or wire saws. When used without impact, the level of noise and vibration along building structures is minimized.
This method is used for cutting in brick and reinforced concrete structures, in order to reduce damage to building structures when installing new openings (structures)…
INTERDEPARTMENTAL COMMISSIONS
Coordination of changes in the layout of the apartment is a necessity; this is strictly prescribed in the Housing Code and in case of violation, the housing commission has the right to impose an administrative penalty, with an order to approve or dismantle the erected partitions. In case of disagreements with the housing inspection (HIC) and violation of the rights of third parties, it is possible to involve the prosecutor’s office, a possible result of interactions with which will be the sealing of the premises and their sale at real estate auctions...
APARTMENTS DESIGN
Our specialists will be happy to help you remodel, re-equip and rebuild your apartment in accordance with the regulatory documents in force in the city of St. Petersburg. We will provide accurate information about the current building regulations within the framework of the redevelopment project and provide qualified support in the field of placement and installation of equipment...
TECHNICAL INSPECTION
When carrying out repair and construction work in old houses, in pre-revolutionary houses without major repairs, in new houses, when the load-bearing structures of the house are affected, there is a need to inspect and restore individual components and structures...
CHIMNEY SWEEPER'S ACT
The necessary indicators of the microclimate in the apartment are regulated by SanPiN 2.1.2.1002-00. An important indicator for ensuring air balance in the apartment is the presence of natural ventilation in the kitchen, bathroom and toilet. Conversion of this system to a mechanically driven system is not permitted...
AIR CONDITIONER MATCHING
Maintenance and repair of building facades in the city of St. Petersburg is regulated by Decree of the Government of St. Petersburg dated April 16, 2009 No. 416, November 9, 2011 No. 1546, September 20, 2012 No. 1002, July 17, 2013 No. 501)…
PROJECT OFFICES
Specialists will be happy to help you in coordinating the redevelopment of the apartment, refurbishment of the premises and reconstruction of the apartment in accordance with the regulatory documents in force in the city of St. Petersburg. We will provide you with accurate information about current regulations...
TECHNICAL INVENTORY
Technical inventory of residential and non-residential objects is a complete description and individualization of an object, which, as a result of the survey, receives new characteristics that clearly distinguish it from other capital construction objects...
The main purpose of technical inventory is registration of real estate in the cadastral register...
SERVICES DISASSEMBLY REMEASURING REPLAYING REPAIRS APPROVAL TECHNICAL SUPERVISION ASSESSMENT CONTACTS
| PIBSPB, St. Petersburg, Engelsa Avenue, 27B Web-site: pibspb.ru tel.+7(812)913-83-83 |
| © 2004-2021 |
Maintenance of modern engineering systems of apartment buildings
You can compare residential buildings to a person.
If cleanliness in the yard and entrances is the attire of the house, by which everyone is greeted and seen, then utility networks are the internal organs. And their health depends on the quality of home maintenance. It is no secret that the housing and communal services reform is placing increasingly stringent demands on management organizations, and today in the housing and communal services market the most in demand are those that are able to perform the full range of tasks for servicing housing and communal services with minimal involvement of third-party (contractor) organizations . Today it is a self-sufficient organization in the field of maintenance and repair of modern engineering systems of apartment buildings.
We often get asked questions about what residential maintenance involves. Many residents have never been to the basements and technical floors, have not seen the equipment installed in pumping and individual heating points... And rightly so. The lack of questions from owners about the operation of engineering systems is an indicator of the good work of the management company in the maintenance of apartment buildings.
