How to enter any entrance without a key. Intercom codes

First, know what awaits you legally

This article is for informational purposes only. You use all information below at your own risk.

Important: if you enter someone else’s entrance, this will not be considered illegal entry into the home. But if you damage the intercom or the door, then this is already a break-in, damage to property and liability under the Code of Administrative Offenses and the Criminal Code of the Russian Federation.

Do not try to open the door by applying a stun gun to the intercom key reader! Some intercoms are protected from this, but most models fail when hit by a shocker.

The same applies to recommendations to open the intercom together: when one person kicks with force below the panel with buttons, and the second sharply jerks the door. The probability of breaking electronics is very high.

There is also Art. 36 Housing Code of the Russian Federation. She says that apartment owners own by right of common shared ownership the common property of the house, for example, entrances, elevators, basements.

This means that the owner of any apartment has the right not to allow strangers into the entrance. And he may ask you for documents that certify your right to be in the entrance.

If you just walked into the entrance, it’s unlikely that it will come to court and fines, but they can make some noise. If the tenants prove that you entered the intercom code for personal gain , then this is a reason to go to court.

And one moment. If you have an intercom at your entrance, but you don’t want to pay for installation, maintenance and keys, you have every right . Contact the intercom company and present your registration. They are not required to give you a key, but must provide you with an access code that will allow you to open the door and enter the entrance.

Algorithm of actions

But besides the universal code, there are also other methods for opening a door with an intercom without a key. Here are some of them:

1. A man with remarkable strength can lean on the door panel and sharply yank it towards himself. This simple method may work.
2. If you turn on the electric shock device and direct the discharge to the chip built into the panel, the lock will open.
3. You can bring a burning lighter to the chip and hold it for a few seconds, the lock may open. This method is not 100% effective, but sometimes it works.
4. Hitting the area 15 cm below the panel will reduce the force of the magnet, which will allow the door to open.

The listed methods are not legal. Therefore, if you decide to use one of them, you need to be prepared to bear responsibility. In order not to create problems for yourself, it is better to disturb the residents of other apartments or wait for someone entering/exiting the entrance.

Another option that is increasingly being used to protect housing is the services of a concierge in an apartment building. The decision to hire a door attendant is made by the owners of the premises. The duties of the concierge include monitoring not only who comes, but also order, and preventing damage and theft of common property.

What kind of locks are on intercom doors?

Appearance of an electromechanical lock
Entrances with intercoms usually have either electromagnetic or electromechanical locks.

An electromagnetic lock is a coil of cable with a steel core that is usually installed in a door frame. When voltage is applied to the coil, it attracts a polished metal plate mounted on the door leaf.

Typically, an electromagnetic lock is powered by a DC power source. The higher the power of the lock, the more difficult it is to tear the door leaf from the frame.

But if the electromagnetic lock is old or cheap, you can try to forcefully pull the door towards you. Some models are designed for a holding force of only 50 kg (but more often 700 kg or more). It is not so much the strength that is important, but the sharpness of the jerk.

This will not work with an electromechanical lock. Here the bolt and latch fit into the grooves on the door frame; you cannot get them out of there by jerking the door.

Another option is to take a powerful electromagnet. It is necessary to position it with reverse polarity to the holding plate to compensate for the field from the coil.

Where to get and from what to power the electromagnet, history is silent...

Finally, intercoms are sometimes opened with a regular lighter. You need to remove the piezoelectric element from it and strike a spark several times on the key reader. But this risks damaging the intercom.

Vizit intercoms

To get started, you should try the standard combinations:

▪ 12#345 ▪ 67#890 ▪ *#423 ▪ *#4230 ▪ *#3423 ▪ #196.

If the keyboard does not have the “*” and “#” buttons, press “C” and “K” respectively.

The service menu of the device can be called with code #999. If the call is successful, the intercom will emit two intermittent beeps.

After this, you can enter one of the combinations:

▪ 1234 ▪ 12345 ▪ 0000 ▪ 9999 ▪ 3535 ▪ 6767 ▪ 7056 ▪ 11639.

After a successful combination, the intercom will emit one short signal and open the door. In case of failure - two signals: try the next combination.

To exit the menu, press “*”.

By the way, if you successfully entered the menu with code #999, you can press 3 and attach a new key to the reader. If the intercom has enough memory, it will remember your key and you can open the entrance door with it.

Metacom

A fairly simple intercom, with a system circuit using Factorial technology.

Such a device can be opened in three different ways:

1. It is necessary to enter sequentially the following combination of numbers and keys located on the control panel:
   "Call button."
2. “Number of the 1st apartment of the entrance.”
3. "Call button."
4. "The display shows the word COD."
5. «5702».
6. If the first method does not give the expected results, you should use the second method:
   «65535»
7. "call"
8. «1234»
9. "call"
10. «8»
11. The third method is much simpler, but requires entering prime numbers accurately and consistently:
    «1234»
12. "Call"
13. «6»
14. "Challenge Again"
15. «4568»

In Metakom locks, there is a model MK - 20 M/T, the opening of which is significantly different from other standard types and involves two opening methods:

1. First method:
   "Call".
2. «27».
3. "Call".
4. «5702».
5. Second method:
   "Call".
6. «1».
7. "Call".
8. «4526».

Cyfral intercoms

Here everything is a little more complicated: the combinations depend on the model. For example, if the model has the letter “M”, the combination “B” – 41 – “B” – 1410 can work. Sometimes instead of “B” there is a call button with a bell symbol.

You can open the entrance with the CCD 2094 intercom if you go to the service menu and enter the combination 0000. For the CCD 2094M, the combination 0000 - “B” works. After this the logic is the same:

1. “COD” will appear on the screen. 2. Enter the combination 123400, 123456 or 456999, press "B". 3. When you see “F0” on the screen, enter 601.

The CCD 2094.1M model can open the combination “B” – 0000. Usually after this the message “ON” appears on the display. This means that the installers did not change the standard codes. Press 2 and the door should open. If you saw the inscription “OFF”, then when installing the intercom, the quick entry mode was disabled.

In addition, if there are apartments No. 100, 200, etc. in the entrance, you can use the code: the number of such apartment is “B” - 2323, 7272 or 7273.

You can also try combinations “B” - 2751 or 07054.

Opening Barrier II, 2M and 4

These are very old intercom models. And that is why they are often still found in old nine-story buildings and five-story Stalin buildings. You won't find anything like this in new buildings 100%. In the “Barrier 2” and “Barrier 2M” models, to enter the entrance you need to press the buttons “1” and “3” or “1” and “0”. Sometimes you can open the door simply by moving a magnet in the area where the keys are placed. For the Barrier 4 model there are no universal keys or codes at all.

Other brands of intercoms:

Rainmann and Raikmann intercom codes

Despite some similarity in names, Rainmann and Raikmann intercoms are completely different devices. Raikmann devices are resistant to hacking and cannot be opened without a key using a code. But the Rainmann CD-2000 and AO-3000 models are found. In order to open the 2000th model, you need to click on the “key”, then enter the code “987654”. After this, the intercom will beep and you need to enter the numbers “123456”. If the engineering menu is available, the “P” icon will appear on the screen. Now, in order to unlock and open the door, you need to press the number 8. It’s better not to press anything else - you can turn everything off and get rid of the residents. Another life hack that users have noticed is the reaction of the touch keyboard to hypothermia. If you roll a snowball, apply it and hold it for 15-20 minutes, then there is a chance to open the door.

Factorial

Setting up intercoms of this brand is very, very similar to the already familiar Digital, with the only exception that when installing the device, it is necessary to change the master password and therefore it is believed that it will not be possible to open it. Although there may be a hacking option through the engineering menu. To do this, you need to dial the Factorial intercom code. In most cases the following are used:

000000 123456

Another option is to press the “5” button and hold it for 5-6 seconds, then type this:

180180 + “Call” + 4 + “Call” key.

Laskomex (Laskomex)

To open the door on the Laskomex AO-3000 VTM, try entering the keys: 1 + “Key” + 8976 66 + “Key” + 1989 Didn’t work? This means the code was changed during installation. To enter the service menu, you need to click on the key 5 times, after which a password entry field will appear. The default is: 1234. Most often, it is changed upon installation, but there is still a chance. Code P8 is responsible for opening the door “Laskomex AO-3000VTM”.

DomoGuard

A rare guest in our high-rise buildings. It is extremely rare. To open the Domogard intercom door, make one long press on “C”. After it makes a sound, quickly enter the code:

669900 + “Call” + number of the last apartment in the entrance plus 1

After this, the following message will appear on the screen: “F—”. We're inside the service menu! Then you can use one of the following options:

080 — Open door 333 — Remember new key 071 — Disable door lock

Blink

These are not entrance intercoms, but individual ones, used most often in private homes or where there is a concierge. There are no universal codes for it.

T-Guard

Another rare model. There is only one hacking option:

“Call” + 00000 + “Call” + “Call”

The last two calls must be pressed quickly and the entrance intercom will open.

Forward

There is very little useful information on Forward intercoms on the Internet. There are only three known universal keys that we managed to unearth:

123*2427101 K+1234 2427101

In order to program your door key for “Forward”, you can try entering “77395201”+”*”+0+”*”. After that, apply the key tablet and press “#” twice. If the code “77395201” did not work, try this one: “5755660″.

Condor

There is no information on master codes for the Condor intercom.

KS-intercom

There is very little information about how to open a KS intercom. The only code I could find:

“K” + “377” + pause + “698” + “K”

There is also information that sometimes the code works:

"K"+0000 "K"+9999

Or:

“K”+ 0000 + pause + 98 “K”+ 0903 + pause + 98 + pause + “K”

Unfortunately, they don't always work either. Video: opening the intercom “KS”:

Techcom

There is information on the Internet that it will not be possible to open the Techcom door so easily. In some cases, the following may work. You will definitely need a key for such an intercom. Press and hold three buttons “1”, “6” and “0”. After that, we release them one by one. We start with “0”, then “6” and “1”. A signal will sound. Here we enter the default pass - “4321”. If the password is correct, click on “Call”, then on “3” and again “Call”. We bring the key and the door will open. I haven’t tested this method myself, but I can’t vouch for it.

Impulse-DS

There is very little information on Impul-DS intercom models. Possible options:

“1234”+”C” “B”+”99911″+”B”

The first option almost never works, because... The code will definitely be changed when installing the device.

Golden eagle

The entrance intercom Berkut LS 2001 is the only model of this manufacturer on the market so far. It is a simple device based on an oscillating circuit, which is assembled with a resistor and capacitor. Universal codes

"key" + 123456 + "key" + 5150С "key" + 123456 + "key" + 206С "key" + 123456 + "key" + 6140С "key" + 123456 + "key" + 2589С

You can also try making your own master code. To do this, type the command: “key” + 23456 + “key” + “ХХХХ” the “F” icon will appear. Now click on “9” and “key”. Next, you can enter your 4 digits.

Leader-M

These devices have not been produced for a long time. Unfortunately, there is no information at all on how to open Leader-M.

Keyman

At the time of writing, there is only one known master code for the Keyman intercom:

"K"+100+789+123456+8

In some cases, input without the last eight is rolled. Video guide:

Marshal

To open the Marshal intercom, you need to enter a number equal to the number of the last apartment in the entrance +1, and after that - “K” + “5555”. That is:

“Number+1” + “K” + “5555”

It works every other time.

Coral Intercom Service

The devices are extremely rare. There are only two known master keys for Coral Service:

123 + "beep" + "1234"

or

“00”+”beep”+”773952004″

Kamsan (KamSan)

There is no universal master code for KamSan intercoms, namely the KS-2002 model. There is no information on their programming. What is known is that it will automatically go into programming mode if you attach an empty blank key to it.

Commax

In the entrances you can find two models of this manufacturer - COMMAXCDV-50A and COMMAX CDV-50AM. Their device is very complex and practically no one has been able to crack its security. The only code I could find was this:

“K”+”S” + “K”+”S” + “K”+”S” + “K” + “K”

Kocom (Intercoms Kak or Kokom)

There is no information on models from this manufacturer.

Belsplat

At the time of writing, there are no keys to open the Belsplat intercom.

Pierres (Pierce)

In the entrances there are models “Pirrs 1000 Micro”, “Modern” and “Lux”. Factory master code for all three types:

"12345678" "K"+"1234"

Also for the Pier 1000 Micro model the key may work:

“8310649” + “entrance number”

There is evidence that these models of audio intercoms allow you to enter your own code. This is done like this: Enter the master code “12345678”. If it has not been changed, a beep will sound. Press the door open button, and without releasing it, press the number “5” on the keypad. The confirmation signal for entering the settings should sound again. Release the door open button. Now you need to enter your code - 987, for example. The main thing is that there should be no more than 8 digits. Moreover, the sequence of the first two digits should not coincide with the master code or the apartment number in the entrance. After finishing entering the code, click first on the “star” and twice on the “hash”. After this, the intercom can be opened with the code: «987»+»*».

Secret

In real life you can find only one intercom model - “Secret-999”. There are no codes for it. It is not hackable.

Arcades

In fact, the Arcades intercom is a slightly modified KS model, which I already reviewed above. Accordingly, codes from KC should also be suitable for it.

SmartEL

There is no information on codes for the SmartEL brand intercom.

Cron

The default key is “951”, but there is almost no chance that it has not been changed. Hacking Kron audio intercoms is impossible, since nothing can be done without an individual master key.

Stroymaster

There are no universal codes for these devices. The only thing you can do is try to enter the system menu and put your code. But to do this, you first need to learn the procedure for programming a new key, which is very labor-intensive. Well, then you will need to press and hold the “B” button until the inscription “SYS” appears. After this you need to enter a password. The default is: "1234". If it doesn't fit, then you're out of luck. Did you come up? Great! Program the key according to the instructions and use it!

Attention! If you tried to use the code specified in the article for your intercom and it did not work, there is no need to write angry comments. I make no guarantees. What works in one entrance is not a guarantee that it will work in another. In addition, installers have recently become smarter and, having had enough of problems from young hackers, began to change passwords and master codes.

Eltis intercoms

The logic is the same - entering combinations:

▪ “B” – 100 – “B” – 7272 ▪ “B” – 100 – “B” – 7273 ▪ “B” – 100 – “B” – 2323. ▪ “B” – call button.

If that doesn't work, you can try entering 200, 300, 400, etc. instead of 100.

Sometimes the combinations 9876 – “B” or “B” – 12342133123 help.

If the installers changed the standard codes, you can try to find out the new value. Press "B" and wait 20 seconds. Five numbers will appear on the screen for a split second. Memorize them or take a video on your smartphone. The numbers can be used in the combinations above.

Factorial

The intercom of this company is characterized as one of the most reliable, which is almost impossible to open! It is a myth! The manufacturer regulates its products as equipment that requires a mandatory change of factory settings, but you can still try to hack Factorial!

In order for the SIM to open, you need to enter the six-digit code 000000 and 123456 on the keyboard panel.

If in this case the door does not open, there is an additional option, a sequential key combination:

1. «5».
2. «180180».
3. "call button"
4. «4».
5. "call".

Intercoms Laskomex

Often, the installers of these intercoms provide residents of the entrance with a four-digit code that will allow them to open the door without a key. To get into the entrance, you need to press the “B” button, enter the apartment number and this code.

Keyman

The intercom from this company is the most reliable, which almost no burglar can crack, especially an inexperienced person encountering such a problem for the first time.

To open such an electronic lock, there are only two combinations, when used, not all doors open:

1. Press the “K” button:
   Combination "100".
2. “789” (followed by a beep).
3. «123456».
4. «8».
5. Press the "K" key:
   “170862” (followed by a beep)
6. «0»

Last thing. Is there a universal key for all intercoms?

Craftsmen who make copies of keys for intercoms often sell universal keys . Usually this is the key to an intercom of a specific manufacturer or model.

All standard factory combinations are sewn onto it, which allow you to open the door. If they were not reset during installation, the key will work.

There are also “ all-terrain vehicles ”. These are the keys that postmen, utility workers, etc. usually carry with them.

The secret of such a key is that its code is registered in all intercoms. Thus, when the intercom reads the key code, it recognizes it.

On topic: The mystery of the intercom key. Which one will open any door?

It happens that an “all-terrain vehicle” is a bunch of universal keys for different intercom models. The price of such a bunch is from 300 rubles to 2-3 thousand rubles , depending on the number of keys.

But it does not provide a 100% guarantee that the door will open. It all depends on the installers - whether they changed the default settings or were lazy.

( 111 votes, overall rating: 4.50 out of 5)