What is the inventory number of fixed assets and how to assign it correctly. Why do we need inventory numbers of fixed assets?

The organization of accounting for any company requires strict accounting of fixed assets: the means of labor with which products, work or services are produced. One of the main mechanisms for monitoring the safety and movement of OSes is the assignment of inventory numbers to them: unique digital and symbol combinations that do not change throughout the entire operational life of the OS. When assigning an inventory number, certain techniques are used that allow you to encode in numbers and symbols all the basic information about each OS. In addition to the operating system, inventory numbers are assigned to some other objects important for the functioning of the company.

Why is numbering needed?

Accountants who have been working at enterprises for more than one year know that their organization has fixed assets on its balance sheet, but not everyone in practice is faced with the need to accept a new fixed asset item. Some accounting workers have no idea how to correctly carry out this procedure, register an object in the accounting registers and reflect it on the balance sheet. There are many reasons why an inventory number of fixed assets is necessary:

The presence of a large number of objects at the enterprise;
Constant movements of material assets;
Existence of leased buildings, machinery, machinery and equipment;
Regular inventories of the organization's funds.

Knowing how inventory numbers are assigned to fixed assets, an enterprise accountant will constantly have up-to-date information about the state of fixed assets accounting and promptly provide it to the organization’s management and regulatory authorities.

The official document that you need to refer to when resolving this issue is the Methodological Guidelines for Accounting for Fixed Assets, approved by Order of the Ministry of Finance of the Russian Federation on October 13, 2003 No. 91 n. Here we will only briefly outline the necessary steps and the approximate sequence of the procedure.

Basic Rules

Each OS object is assigned an inventory number once for the entire period of its operation.
If an object consists of several parts, each is numbered separately.
The number of an object written off the balance sheet should not be assigned to other types of property of the enterprise for 5 years.
Moving the OS within the enterprise does not serve as a reason to change the number.
Leased funds can be accounted for by numbers assigned by the lessor.

Numbering of fixed assets

The Order on the accounting policy of an enterprise must include a clause on how to assign inventory numbers to fixed assets. The numbering order of the OS is reflected here, that is, the inventory number, how many digits it can have, is regulated only by this document. In enterprises where the number of objects is small, you can use simple numbering: 001, 002, 003, etc. For a large number of objects, a more complex system is used, let’s take No. 0104001, where:

01 - code in synthetic accounting (Chart of Accounts);

04 — code of a structural unit of the organization (warehouse, workshop, office);

001 - serial number of OS in the list of items similar in purpose.

Inventory number example:

A forklift has arrived at warehouse No. 2, and the same warehouse already has one. The inventory number of a new forklift can be set using the above method:

01 - account number in the Chart of Accounts;
02 - warehouse number;
002 is the serial number of forklifts in this warehouse.

In this case, the number will be 0102002.

Method of applying the number to the OS

In the practice of accountants, there are cases when it is impossible to apply numbering to an object using accessible methods; in such situations, data about the operating system is stored only on accounting registers. Objects to be numbered can be marked using any method possible for the organization:

Using paint and stencil:
Apply stickers or tokens;
Use engraved plates.

Advice. Do not forget that by applying the inventory number incorrectly, you can spoil the numbering object itself; carefully consider all the nuances before you begin to act.

The head and chief accountant of the organization must constantly monitor the correct and timely registration of the movement of fixed assets, this will ensure their safety, allow for prompt receipt of clear information, and will help in organizing the entire work of the enterprise.

Criminal case

Of course they can. The question is not whether you have already served, but when you were registered with the military registration and enlistment office and removed from the balance of the unit.

Did the answers help you? Not really

Good afternoon. My son may have to undergo technical engineering. How to arrange everything, who can I contact about this issue in the Krasnoyarsk Territory? Registered in Shushenskoye, but divorced there. I have a share in my parents’ house in the village. Where can I look for a job in engineering?

You can search for work not only by place of registration. It is possible in agreement with the supervisory inspector and in another place.

Did the answers help you? Not really

Using my power of attorney, the trustee sold an apartment in Essentuki, but did not provide me with any documents or money from the sale. I sent the consent of the spouses to this address on 08/07/2020. At present there is no trustee - he has died. I need sales documents for my income tax return. The person he sold to does not make contact. How should I deal with this situation? There is only a possible power of attorney number.

If there is a power of attorney, then whoever handled the transaction on your behalf essentially did everything on your behalf.

Did the answers help you? Not really

Room requirements

By and large, there are only two requirements for an inventory number: the number must be unique, and the numbering system must be orderly.

Uniqueness refers to the assignment of only one unique inventory number to one object. Simply put, the same number cannot be assigned to two or more objects and, conversely, one object should not be assigned two or more inventory numbers. Moreover, we recommend adhering to this rule even if the object has been removed from the balance sheet. To avoid possible confusion, it is better not to assign the number of a retired object to a new one. After all, documentation for the retired object continues to be stored in the organization, and mixing numbers can lead to errors.

As for orderliness, here we are talking about arranging them in a certain system, and not about creating numbers randomly. This allows the accountant, without looking at the object card, to find out its main characteristics from the first numbers, which significantly speeds up the process of inventory and accounting. Agree, when it is immediately clear from the number what type of object it is, when it was purchased and where it is located, this is convenient.

Documenting

Well, in conclusion, let’s say a few words about documenting all the above rules. As we have already said, “accounting numerology” is not regulated in any way by law. This means that the organization can implement the listed rules independently by approving the corresponding local act.

There are several ways to do this. For example, add a corresponding section to the organization’s accounting policy, or make an appendix to it. However, we do not recommend using this option, because... The accounting policy is subject to special rules regarding the introduction of changes and adjustments (clauses 6 and 7 of Article 8 of the Accounting Law). Therefore, it is not worth introducing additional provisions into it, so as not to deprive yourself of freedom of maneuver.

It is better, in our opinion, to use another option - to include rules for numbering objects in the Regulations on conducting an inventory in an organization. In such a document, the numbering rules will look quite logical. And it would be useful to familiarize yourself with them not only for the accountant, but also for any employee included in the inventory commission.

Finally, you can approve a separate document in the organization - Regulations on the procedure for assigning inventory numbers.

Source of the article: https://www.buhonline.ru/pub/beginner/2014/11/9181

What is an inventory number

Fixed assets can be used in work only after they have been accepted for accounting. The unit of such accounting is an inventory object. To monitor the safety of items, their use and condition, they are assigned numbers.

To organize accounting and ensure control over the safety of fixed assets, each inventory item of fixed assets must be assigned a corresponding inventory number when accepting them for accounting.
Order of the Ministry of Finance of the Russian Federation dated October 13, 2003 N 91n (as amended on December 24, 2010) “On approval of the Methodological Guidelines for Accounting of Fixed Assets”, paragraph 1, paragraphs. eleven

Features of number assignment:

The number is indicated on each object.
You cannot change the code while it is in use.
A number can be assigned to an object whose parts have an equal useful life.

Parts of a single object cannot be assigned different codes. It is also not possible to combine several objects under one number. This type of numbering is used only in the company’s internal accounting. When transferring ownership, the number is not retained.

Updates on inventory

In accordance with clause 11.1 of Instruction No. 69, the chief accountant or the person entrusted with maintaining the accounting records of the enterprise is included in the permanent inventory commission by an administrative document of the head of the enterprise.

To confirm the amount of debt on the part of both suppliers (performers) and buyers (customers), the accounting employee transfers reconciliation reports to representatives of debtors and creditors, who, within 10 days from the date of receipt, must either confirm the debt or present their objections in writing (paragraph "a" clause 11.11 of Instruction No. 69).

Inventory number and features of its use

An inventory number is assigned to a property at the time it is accepted for registration. After this, it acquires the status of an inventory object - a control unit. The number is applied to the object using durable paint, a barcode, engraving, using a token that cannot be quickly and discreetly removed, or in another similar way. The number must be applied so that during an inventory it can be easily and without errors identified with the BU data.

The main objects in relation to which management is organized in this way and control is exercised are:

OS - fixed assets, objects of property of the organization that have been in operation for more than a year, are intended for production needs, and the cost of which is a legally defined amount;
intangible objects, assets (IMA) - these include products of intellectual labor, for example, technological developments, software development, trademarks, brand names and other objects that do not have a material form, but which can in the future bring material benefits (see. Civil Code of the Russian Federation Article 1225-1, PBU 14/07);
non-produced objects, assets - these are natural objects, subsoil, lands, water bodies, etc.

Objects costing less than 3 thousand rubles. no inventory number needed.

The following mandatory requirements apply to inventory numbers:

they should not be duplicated;
they must be assigned in order.

In addition, when using inventory numbers in accounting records, it is important to be guided by the following important information:

The inventory number is applied in the presence of a commission specially created for this purpose and recorded in the inventory number journal.
If the inventory object is a whole consisting of separate functional parts, a number is applied to each part.
Moving an inventory item within the organization or its divisions is not a reason to change the number or adjust it. The inventory number does not change during the entire operation of the object to which it is assigned.
If fixed assets are leased by a company, they are usually accounted for by numbers assigned by the lessor. At the same time, from Resolution 11 of the Arbitration Court of Appeal No. A55-24142/2013 dated 04/28/14, it follows that when the rights to an inventory object are transferred, for example, when signing a leasing agreement, it may be assigned a new inventory number of the organization that acquired such rights. It is argued that the assignment of inv. numbers are an internal matter of the organization.
The inventory number of an object deregistered (sold, written off, etc.) cannot be assigned to another object in the same organization.

What objects are subject to numbering

Codes are assigned to the following objects:

Fixed assets. These are tangible items that can be used in work for 12 months or more. For example, equipment, tools, furniture, etc.
Intangible objects. For example, a movie, a multimedia product, technology.
Non-produced assets. These are the resources of the earth's interior, land plots, etc.

The codes are indicated in the documentation for accounting for fixed assets and are used during inventory. Movable and immovable property is taken into account.

Library collection objects are assigned codes regardless of cost. All objects are subject to numbering, regardless of whether they are used in work or are in stock.

What is the difference between cadastral value and inventory value? Determination of cadastral value

Regional authorities decide to conduct an assessment. It should be carried out at least once every 5 years.
On this basis, Rosreestr prepares a list of objects to be assessed. Data is taken from the state cadastre.
Rosreestr attracts an appraisal firm on a competitive basis.
The appraiser, based on regulatory documents and the coefficients specified in them, carries out the entire procedure.
The self-regulatory organization of appraisers carries out an examination of the cadastral valuation report.
The obtained data is approved by the regional authorities and published.
The data is entered into the cadastral registration system.

If tax rates remained the same, most property owners would go bankrupt overnight. So, in the Urals, if the price of an apartment in the registration certificate is indicated at 200 thousand rubles, after revaluation it is at least 500 thousand. The state, in circumstances in which the cadastral and inventory values of real estate are so different, decided to somewhat compensate for the losses of taxpayers using tax rates. As a result, regions were given the right to set tax rates, albeit within the corridor approved at the federal level. For housing, the maximum rate is set at 0.1% if the value of the property is no more than 300 million rubles.

General drafting rules

The legislation does not provide for a special procedure for assigning numbers. The organization has the right to independently develop these regulations. The procedure is prescribed in the accounting policy of the enterprise or another act.

The main requirement is to indicate a unique number for each object. It is unacceptable for designations to be repeated. If a fixed asset is deregistered, its number can be assigned to another object after at least 5 years.

The numbers must be sequential. In large organizations, it is better to develop guidelines for assigning codes. The number may consist of several parts: a company branch, a division, a code within a division. When transferring funds to other branches, they will not be lost. Small firms can use simple numbering starting from 1.

Method of applying the number to the OS

Using paint and stencil:
Apply stickers or tokens;
Use engraved plates.

Advice. Do not forget that by applying the inventory number incorrectly, you can spoil the numbering object itself; carefully consider all the nuances before you begin to act.

Normative base

The legislation does not contain a clear regulatory framework regulating step by step how to assign inventory numbers. There is Instruction of the Ministry of Finance No. 174n (Appendix 2), containing general instructions on the assignment of inventory numbers. In addition, Instruction No. 157n (clause 46) applies to municipal unitary enterprises, where the procedure for such appointment is discussed in somewhat more detail. Guided by these documents and current legislation, the organization independently develops the structure of inventory numbers and the procedure for assigning them, enshrining it in local regulations (accounting policies, etc.). The procedure for assigning numbers can also be regulated at the departmental level, established by a higher organization.

How to create an inventory number: example

A computer was used for accounting. The object was issued to unit number 9. The last registered code is 0121.

The computer belongs to the list of “Machinery and Equipment”. As a result, the object was registered under number 9101340122:

9 - department code.
101 - synthetic accounting code.
34 - analytical account code.
122 — object number in order.

During the reorganization of an enterprise from one form of ownership to another, its owner changes. Each new owner sets new inventory numbers for all objects.

The cadastral registration authorities store information about buildings: the inventory number of the house and an additional code in the form of numbers or letters. This number allows you to determine the area and type of property.

There are no strict instructions on how to correct errors when assigning numbers. Depending on the situation, you can complete the item, write it off, or register a new item.

Inventory of objects must be carried out by attentive and responsible accountants according to regulations. Errors in accounting for funds are punished by regulatory authorities. The company will pay fines if the accounting procedure is violated.

How to build a numbering system

What information exactly can and should be “encoded” in the inventory number? For example, it can reflect an accounting account; depreciation group number; OKOF code; period of registration (year, month); division (branch) or building (building) in which the facility will be used. That is, in essence, the inventory number can be similar to the VIN of a car, which also encrypts all the information, from the place and year of manufacture to the configuration. And again, by analogy with the automobile industry, the inventory number can consist not only of numbers, but also of letters. For example, letters can be used to encode the period of acceptance for accounting, or the location of the object.

When choosing the information that needs to be encoded in the number, you must remember that an overly complex and (or) redundant structure of the inventory number is inconvenient to work with. Accordingly, the number should include only those criteria that will actually be used in the work. And, of course, when compiling a number, you need to take into account the capabilities of the software used in the company: whether they can support all the criteria “coded” in the number.

For what assets are they formed?

One of the most important tasks of an organization is the proper use of fixed assets. For ease of accounting, each piece of property is assigned an inventory number. These numbers apply throughout the entire period of use of the property.

Conditions for inventory numbers

The number assigned to an item of fixed assets will reflect this item in accounting throughout the entire period of use of this item.
All parts of the property that have their own terms of functionality are assigned a separate inventory number. This means that one OS can have several numbers at once, depending on the number of parts. If an object has component parts, but is not divided by useful life, it is assigned only one number.
The inventory number remains with the asset even in situations where the asset moves within the company. If an organization uses an asset under a lease contract, the asset must retain the number assigned to it by the lessor.
If the assignment of inventory numbers is reflected in a special document, then the procedure for their compilation is not regulated. This obligation rests with the companies themselves. In this regard, companies should, before generating numbers, draw up an internal company act that will determine the sequence of generating these numbers.
The compilation of inventory numbers can be based on the accounting numbers by which inventory assets are recorded. If the company has branches, their numbering may be included in the inventory numbers. All numbers must be recorded in a special journal of inventory numbers.
The number must be placed on each item to be counted. It can be written on the object itself, or on a piece of paper.

12 Feb 2021 marketur 99
Share this post

The TV antenna in the house was turned off, how can I find out what’s wrong?
Collection of funds paid under the contract for non-fulfillment
Form for refusal to exchange goods of good quality
If the second birth and twins what benefits?

Assigning inventory numbers to fixed assets

General approaches to assigning inventory numbers to fixed assets are specified in the Guidelines for accounting of fixed assets (Order of the Ministry of Finance of the Russian Federation No. 91n dated 10/13/2003 (as amended on 12/24/2010)) and Instruction No. 157n (Order of the Ministry of Finance of the Russian Federation dated 12/01/2010). According to them:

the inventory number is unique, that is, there should not be two fixed assets with the same inventory numbers,
if the object is composite, that is, it consists of elements that make up a single whole, then all parts of the complex fixed asset are allocated one single inventory number,
inventory numbers must be in order,
the inventory number does not change when the location of a fixed asset object changes within the same organization,
once an inventory number is attached to a fixed asset, it remains with it throughout the entire time it is in the organization,
inventory numbers of fixed assets removed from balance sheet accounting are not assigned to newly accepted fixed assets for accounting,
For a fixed asset received by an organization under a lease agreement, the same inventory number may be used that was assigned to the fixed asset by the lessor.

We put the number correctly

Typically, inventory numbers are applied directly to the object. However, there are nuances here too. First of all, it is worth specifying where exactly the number is applied. This will greatly simplify the inventory process itself, since the commission will know exactly where to look for the number and will not have to examine the object from all sides in search of the “cherished” numbers. In addition, this approach will improve the aesthetic appearance of the objects - they will look neat even after many years.

For example, you can establish a rule in your organization that the inventory number on machinery and equipment is always applied next to the factory number (easy to find; this place is protected from harmful influences). And on cabinets and bedside tables that have doors - inside, on the upper inner corner of the left door (easy to apply; less likely to be damaged during use and cleaning; visible during any rearrangement). By the same logic, on tables it is better to place the number on the inside of the leg or on the side panel.

Finally, some objects are too small to be numbered. In such cases, the number may not be applied at all, which must be noted on the inventory card. In this case, it is advisable to configure the accounting program in such a way that the accountant can quickly generate a list of such unmarked objects indicating their physical location. This will speed up the inventory process.

Introductory information

Inventory consists of actual confirmation of the organization’s assets declared in accounting, i.e. in the reconciliation of actual and accounting data (Article 11 of the Federal Law of December 6, 2011 No. 402-FZ “On Accounting”, hereinafter referred to as the Law on Accounting). To carry out such a check, each object is assigned a special inventory number in advance. The legislation regulating accounting in commercial organizations does not impose any special requirements for these numbers. As a result, accountants number objects, as they say, as God pleases, which often creates difficulties during inventory. Especially if the numbers were assigned by one chief accountant, and the inventory is carried out by another. However, there are ways to streamline this aspect of accounting activities, making object accounting simple, convenient and transparent.

Accounting for the tenant

An important point is that the leased asset, which is registered by the tenant, must strictly comply with specific requirements:

the object is used exclusively in the main (production and economic) activities of the organization;

the regulated useful life of this asset exceeds twelve months;
there is a real possibility of profitable use of the fixed asset;
the asset was acquired by the owner not for subsequent resale to third parties.

Thus, the compliance of a property object with all of the above criteria is the basis for its registration as an asset related to fixed assets.

The fact of transfer and acceptance of an asset under a lease agreement is necessarily certified by the execution of the corresponding act, which, as is known, is a necessary addition (appendix) to the agreement concluded between the lessor and the lessee.

Operating lease of fixed assets

Economic relations involving the transfer (provision) and acceptance (receipt) of a specific fixed asset item for a certain fee under temporary operation conditions are most often carried out under an operating lease.

A characteristic feature of this transaction is the immutability of the owner of the leased asset.

Operation of an asset provided under an operating lease is permitted solely for its intended purpose - only to perform production tasks.

The lessee, however, has the right to improve the technical and operational parameters of the leased equipment (asset), having previously agreed upon the relevant measures with the lessor (owner) of the fixed asset.

How to take into account the value on off-balance sheet account 001?

The fact of acceptance and registration of an asset by the tenant is recorded in the debit of account 001.

At what cost should the asset be accounted for? The fixed asset is accounted for by the lessee at the cost specified in the relevant lease agreement.

The disposal of an asset and its subsequent return to the lessor is reflected by the lessee on the credit of account 001.

By the way, account 001 refers to so-called off-balance sheet accounts in accounting.

Lease payments, which are periodically made by the tenant for the operation of the fixed asset, also require tax and, of course, accounting.

In essence, the rental fee for fixed assets is the direct costs of the tenant, reflected as part of the cost of the main or, alternatively, auxiliary production.

The specific scope of attribution of such costs is determined by the functional purpose of the leased equipment.

Postings

Payments for the lease of fixed assets are taken into account by the tenant enterprise as part of the expenses of its ordinary activities.

For tax accounting, rent is written off by the tenant as expenses that constitute the cost of services, work, and goods.

Taking into account the leased fixed assets, the lessee company draws up the following typical transactions:

Operation (description)	Account debit	Account credit
The leased asset is registered	001
The rent payment is included in the costs of the tenant company (excluding VAT)	44,26,25,20	76
The VAT amount is taken into account separately from the rental payment	19	76
The amount of VAT paid is deducted	68 (according to VAT subaccount)	19
The rent payment is transferred to the lessor	76	51
The asset is returned to the lessor (upon expiration of the lease agreement)	001

Depreciation

If an asset is used by an organization under an operating lease, the lessee enterprise does not charge depreciation on such an asset.

However, for tax accounting reasons, the lessee can depreciate capital investments (investments) in leased fixed assets on the following basis:

the lessor of the fixed assets agreed in advance for the tenant to make such capital investments;
the cost of such capital investments will not be reimbursed by the lessor to the lessee;
such depreciation is carried out by the lessee during the term of the lease agreement;
the amounts of such depreciation are calculated according to the regulated useful life of the leased fixed assets.

Question:

Each building, as an object of fixed assets, must have an inventory number. What is regulated by such a requirement? And is the inscription itself regulated (painted, plate attached, font size, etc.)?

The application of inventory numbers to real estate objects is regulated by the relevant instructions (guidelines) for accounting.

The inventory number assigned to a real estate object is designated by the financially responsible person in the presence of members of the commission for the receipt and disposal of assets by attaching a token to the object; applying paint; in any other way to ensure the safety of the marking.

At the same time, if an object of real estate has a unique number that allows it to be unambiguously identified as an individually defined thing (for example, a cadastral number), the inventory number does not need to be applied to this object.

Requirements for the method and location, size and color of markings or plates (tokens) with the inventory number of a real estate property can be established by organizational and administrative documentation (orders, instructions, standards, etc.) of the relevant organization.

Typical mistakes when assigning inventory numbers

Inaccuracies and errors made can not only bring chaos to the process of accounting for inventory items, but also lead to negative consequences when conducting external control. This is especially true for municipal unitary enterprises, other government organizations, and subordinate organizations. The most common ones are listed below:

Discrepancies with the accepted accounting policy: arbitrary change in the length of the number, inclusion of letter designations in it, or, conversely, ignoring them in practice.
Applying the number in a way that does not ensure its safety during the entire operation of the object: with weak dye, by gluing labels, etc.
Failure to affix an inventory number due to the alleged impossibility of affixing it. Indeed, instruction 157n allows you not to physically affix this number, but only to enter it into the control unit registers under appropriate conditions. However, if the control commission discovers that the application was in fact possible, the organization may have problems.
Applying an inventory number to objects arbitrarily, unnecessarily. Example: numbering an object worth less than 3,000 rubles.

Error 1. Incorrect number structure

There are no special requirements for the formation of inventory numbers either in Instruction No. 157n or in other regulatory legal acts. Therefore, institutions can independently develop a procedure for generating inventory numbers and reflect these rules in their accounting policies. Typically, the structure of the inventory number includes the information that an institution needs for operational accounting of non-financial asset objects, for example, a code for the type of activity where the object is used, a synthetic account code, an analytical account code, or a serial number. The first and quite common mistake is failure to comply with the requirements for the structure of inventory numbers recorded in the accounting policy - for example, if, according to the requirements of the accounting policy, the inventory number must consist of 10 characters, and the inventory number assigned to objects consists of 14 characters (see materials published on the official website of the Chuna district municipality: www.chuna.irkobl.ru, path: Chamber of Control / Results of control activities / Report No. 01-16/06 dated 11/14/2014).

Error 2. Incorrect choice of method for affixing the inventory number

The main methods for affixing inventory numbers assigned to fixed assets are listed in paragraph 46 of Instruction No. 157n. This regulatory document states that the inventory number assigned to an object must be designated by a financially responsible person in the presence of an authorized member of the commission for the receipt and disposal of assets by attaching a token to it, applying paint to the accounting object or in another way that ensures the safety of the marking. Thus, the list of methods for affixing inventory numbers is open, and practice shows that quite often specialists from institutions print out data on inventory numbers on paper and stick them with tape. This method is often used when assigning inventory numbers to stationary objects: benches in the gaming room, table tennis tables, etc. However, this approach often raises objections among inspectors. It is believed that in this case we can say that the inventory numbers are applied in a way that does not ensure their safety, that is, the requirements of paragraph 46 of Instruction No. 157n are violated - see, for example, the information posted on the official website of the Cherepovets municipal district (www. cherra.ru, act of control activities of the control and accounting committee of the Municipal Assembly of the Cherepovets Municipal District dated 10/05/2012 No. 33).

Error 3. Assigning inventory numbers when there is no such need

Instruction No. 157n provides for two situations when assigning separate inventory numbers to a piece of sports equipment is not necessary. Firstly, as we indicated above, this is the low cost of the object. Secondly, the classification of an object as a complex fixed asset or fixed asset with accessories is important. Sports equipment worth up to RUB 3,000. no inventory number is assigned. However, this is often forgotten. As an example, we can cite the materials of one of the audits conducted by the Control and Accounts Chamber of the city of Saratov. Specialists from the regulatory agency established that the institution’s balance sheet included items worth up to 3,000 rubles as fixed assets, including weights, expanders, and dumbbells. In violation of paragraph 46 of Instruction No. 157n, these objects were assigned unique inventory numbers - see the information published on the official website (www.kspsaratov.ru, path: About the chamber / Activities of the chamber / 2013 / Information on the results of an audit of the financial and economic activities of the institution health care "Center for Regenerative Medicine and Rehabilitation"). The basic rules for accounting for complex fixed assets or fixed assets with accessories are as follows (clauses 45 and 46 of Instruction No. 157n). An inventory object of fixed assets is an object with all fixtures and accessories, a separate structurally isolated object, a separate complex of structurally articulated objects. If one structurally articulated object has several parts - fixed assets that have different useful lives, each such part is accounted for as an independent inventory item. But if for a complex of structurally articulated objects consisting of several items, a common useful life for all objects is established, the specified object is taken into account as an independent inventory object. If a fixed asset object is complex (a complex of structurally articulated objects), that is, it includes separate elements (structural objects) that together form a single whole, each such element (structural object) must be marked with an inventory number assigned basic means (complex object, complex of structurally articulated objects). Despite the simplicity and logic of these regulatory rules, physical education and sports institutions may encounter problems when applying them to sports equipment. A typical example is basketball backboards. According to the appendix “Basketball Equipment” to the Rules of the sport “basketball” (approved by Order of the Ministry of Sports and Tourism of the Russian Federation dated May 12, 2010 No. 482), two shield designs are installed in the playing hall, each of which must consist of the following parts: – one shield; – one basket with a ring attached to the shield; – one grid; – one support supporting the shield; – upholstery. Practitioners may wonder how to assign accession numbers for these items. Practice shows that the desire to “play it safe” and record as many small fixed assets as possible in accounting is fraught with claims from inspectors. Thus, based on the materials of one of the inspections of the activities of institutions, the following was recorded as a violation by the control agency. In violation of paragraphs 41, 45, 47 of Instruction No. 157n, the institution assigned different inventory numbers to the devices listed in the accounting records (9 basketball hoops, 9 basketball nets, 9 basketball backboards), which actually represent 9 independent inventory objects - see materials , published on the official website of the Saratov municipal district www.saratov.sarmo.ru, path: Financial and legal sphere / Control and audit department / KRU activities 2015 / Act of the control and audit department of the Saratov municipal district of the Saratov region based on the results of an audit of the financial and economic activities of the Municipal educational institution “Secondary school in the village of Dubki, Saratov district, Saratov region”).

Error 4. Making a decision about the impossibility of affixing an inventory number

As expressly stated in paragraph 46 of Instruction No. 157n, if it is impossible to designate an inventory number on a fixed asset object in cases determined by the requirements of its operation, the inventory number assigned to it is used for accounting purposes with reflection in the relevant accounting registers without applying the fixed asset to the object . For many sports equipment, there is a temptation to apply this paragraph and not indicate the accession numbers. Is it possible to say that the requirements for using sports equipment for team games make it impossible to affix an equipment number? Materials from inspections of the activities of institutions do not always allow us to answer this question positively. In practice, the impossibility of designating an inventory number in cases determined by operational requirements is most often due to the fact that the affixed number is constantly erased and needs to be restored, or the object may deteriorate due to affixing the number. A classic example is dishes (pans, pots), the operating conditions of which require heating to high temperatures. In this case, when accepting the dishes for accounting as fixed assets, a special commission of the institution for the receipt and disposal of assets has the right to determine that, taking into account the special procedure, the inventory numbers on Such categories of fixed assets are not recorded, but are only reflected in the accounting registers. However, in our opinion, this approach should be used with caution in relation to sports equipment. Otherwise, there is a high probability of claims from specialists from regulatory agencies during inspections.

Sources

https://mofree.ru/calculation/skolko-cifr-dolzhno-byt-v-inventarnom-nomere-chto-takoe.html
https://ip-spravka.ru/inventarnyiy-nomer-osnovnyih-sredstv.html
https://assistentus.ru/osnovnye-sredstva/kak-prisvoit-inventarnyj-nomer/
https://buh-spravka.ru/buhgalterskij-uchet/os-nma-oborudovanie-k-montazhu/inventarnye-nomera-osnovnyh-sredstv.html
https://praktibuh.ru/buhuchet/vneoborotnye/os/prochee/uchet-arendovannyh-os-u-arendatora.html
https://www.audit-it.ru/articles/account/assets/a8/882401.html

Inventory of goods

Goods prepared for shipment, according to issued orders, but not paid for and not taken out by buyers before inventory, are included in the main inventory list as own (unsold) goods. In this case, packaged goods (except for goods in factory packaging) must be unpacked and entered into the inventory in kind, and not according to accompanying documents. At the same time, signed by the chairman of the investment commission, a note is made on all copies of orders and other documents for sending goods that these goods are included in the inventory list.

The inventory lists indicate the serial number of the record and for each type of inventory - the name of the product, the nomenclature or serial number according to the price list, article numbers, grades and other distinctive features of the product provided for in the price lists, the number of places, unit of measurement, quantity of goods by account, weight (gross and net), unit price and amount, as well as other necessary data.

Where to look at the technical passport of an apartment building and how changes are made to it

An application for a technical passport must be submitted to the building management company. They must keep a copy. You can also contact the developer, if he still exists. Another authority that stores the registration certificate at home is the local administration. They are obliged to store it indefinitely in the archives of the institution.

REFERENCE! The developer is responsible for preparing a technical passport for the house. Before commissioning, he may refuse an application for a copy, but after the building is commissioned, the passport must be transferred to the homeowners' association.

Where to look at the technical passport of an apartment building and how changes are made to it

This document contains information about the economic and physical parameters of the house. Its main purpose is to inform apartment owners, maintenance and management services, and authorities at any level about all the properties of the building.

IMPORTANT! The owners of the technical documentation for construction are the owners of the residential premises that are located in it. When the organization managing the house changes, the registration certificate is transferred to the new owner. If the house becomes the property of the apartment owners, one of them can receive a passport.